Item Number: EFLA1010

Features:
Up to 10-amp continuous current with proper air flow
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
Programmable throttle input range (1.1ms–1.9ms or Auto Select)
Auto motor shutdown if signal is lost or there is interference
Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
Soft start

Overview

This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2–3 cell Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power-arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.

Specifications

Brake: Yes - programmable
Continuous Maximum Current: 10A
Input Connector Types: 20AWG with JST connector
Output Connector Types: 20AWG with 2mm female gold bullet connectors
Momentary Peak Current: 12A (15 sec)
Length: 1.2 in (30mm)
Width: 0.7 in (17.5mm)
Height: 0.4 in (10mm)
Weight: 0.35 oz (10 g)
Cells w/BEC: 2–3S Li-Po or 6–10 Ni-MH/Ni-Cd